Features

1. The cutter head adopts a single spiral design, which effectively reduces noise, increases the smoothness of the cutting edge, and reduces the burr.

2. Adopt man-machine interface control mode, simple operation and easy maintenance.

3. The use of PLC programmable controller, the system is fixed, and the scalability is strong.

4. The three-component slitting knife can be used for trimming and cutting the paper part.

5. Compared with similar machinery, it is equipped with an automatic edge guide system and a tension control system, which feeds the paper smoothly and automatically corrects the squareness of the paper cutting.

6. Laser identification color mark system, which can cut color printing rolling paper.

7. The newly improved cylinder rolling knife reduces the wind resistance when cutting the paper and enhances the stability of the paper output.

8. Programmable automatic edge and corner adjustment to adjust the best paper angle in real time.

9. AC servo motor control, low inertia, high torque, accurate control to ±0.5mm, improve the speed of seat generation400m/min。

10. High mechanical and electrical integration, neat and smooth stacking.

11. Automatic warning of the height of the pile paper to remind the operator.

12. Safe operation and careful system protection.

—— Main Technical Parameters ——

—— Product Description ——

 

 

Shaftless base paper holder and PLC tension control system

The multi-point tension control system is adopted, and the computer calculation is automatically fed back to the PLC control system. The increase and decrease of the brake load is realized through the proportion, and the tension of the paper is automatically controlled, and the fine-tuning operation can be carried out through the man-machine interface.

 

Cutter part

1. Upper knife roller: The British cutter method is adopted to effectively reduce the load and noise when cutting paper, prolong the life of the cutter, and the upper knife roller body is welded with stainless steel for precision machining, and the dynamic bear balance adjustment can effectively reduce the vibration and noise during high-speed operation.
2. Lower tool holder: The lower tool seat is cast in one piece of cast iron, and then precision machining, with good stability.
3. Drive roller: The roller surface is designed with an expansion pattern, and the pressure clamping of the roller body is controlled by a cylinder.
4. Back cutting knife: made of special alloy steel precision machining, with long life and easy adjustment of the blade.
5. Safety cover: The safety cover will automatically stop when it is opened, and the safety is guaranteed.

 

 

 

 

 

Overlapping

The fast/slow speed belt controlled by stepless frequency conversion speed will automatically track the knife speed and automatically adjust the speed band, so that the paper can be perfectly overlapped.

 

 

 

Delivery

The self-lifting system and the three-sided inter-adjusted delivery part, coupled with the stepless vibration of the paper, ensure that the paper is retracted neatly and smoothly.